Z-EDGE U24C User Manual

HOT
● Function Key Guide
Press the Monitor Button “Enter” key when the screen is turned on. The Function Key Guide will
appear. To access the onscreen menu when the guide is displayed, press the corresponding
direction button again.
－ Function Key Guide may vary depending on the function or product model. Please refer to the
actual product.
Icon Action
Selects to change the input signal by moving the monitor button in the
Function Key Guide screen. A message will appear on the top left corner
of the screen if the input signal has been changed.
Selects by moving the monitor button in the function key guide screen.
The OSD (On Screen Display) of your Monitor’s feature appears.
Selects to turn the Monitor off by moving the monitor button in the
function key guide screen.
Selects by moving the monitor button in the function key guide screen.
Press to enable or disable ECO Mode.
HOT
-9-

Z-EDGE U24C Specifications

General

Brand	Z-EDGE
Model	U24C
Category	Monitor
Language	English