Z-EDGE UG34 User Manual

Model: UG34
Instruction Manual
34" LED GAMING
MONITOR
Please read this manual thoroughly before use and keep it handy for future reference

Z-EDGE UG34 Specifications

General

Brand	Z-EDGE
Model	UG34
Category	Monitor
Language	English

Summary

Safety Information

What's Included

Connections

Power Connection

Details the DC 12V power input.

USB Connection

USB port usage for firmware updates.

HDMI 2 Connection

HDMI 1.4 port supporting WQHD 60Hz FreeSync.

HDMI 1 Connection

HDMI 2.0 port supporting WQHD 100Hz FreeSync.

DisplayPort (DP) Connection

DP 1.2 port supporting WQHD 100Hz FreeSync & G-sync.

Audio Out Connection

Connector for audio output.

Wall Mounting

Initial Setup

OSD Menu

Input Source Selection

Switch signal input to DisplayPort, HDMI1, or HDMI2.

Brightness and Contrast Settings

Adjust brightness from 0-100 and contrast ratio from 0-100.

Color Settings

Configure Gamma, Picture Mode, Color Temperature, Hue, and Saturation.

Picture Quality Settings

Adjust Sharpness, Response Time, Noise Reduction, and Super Resolution.

Display Settings

Adjust Aspect Ratio and other display properties.

Audio Settings

Control Mute and Volume for the audio source.

Multi-window Settings

Configure multi-window modes like PIP/PBP.

OSD Settings

Customize OSD Language, position, transparency, and rotation.

Other Settings

Configure FreeSync, HDR, MPRT, Firmware Update, and Reset.

Specifications