Z-EDGE UG34 - OSD Menu; Input Source Selection; Brightness and Contrast Settings

OSD MENU
Brightness/Contrast
Imput Source
Brightness: change the brightness value from 0 to 100.
Resolution: 3440x1440@100Hz
DP
3440x1440@100Hz
Resolution: 3440x1440@100Hz
3440x1440@100Hz
HDMI1
Contrast: Change the contrast rao from 0 to 100 .
DCR : Turn the Dynamic Contrast Rao by on or off .
Switch the signal input to DisplayPort,HDMI1,HDMI2.