To Next PageTo Next Page
Need help?Do you have a question about the Z-Wave ZSE40 and is the answer not in the manual?
General| Communication Protocol | Z-Wave |
|---|---|
| Power Source | Battery |
| Battery Type | CR123A |
| Battery Life | Up to 2 years |
| Z-Wave Frequency | 908.42 MHz (US) |
| Sensor Type | Temperature and Humidity |
| Operating Temperature Range | -10 to 40 °C |
| Humidity Measurement Range | 0% to 100% |
| Temperature Measurement Accuracy | ±1.8°F (±1°C) |
| Humidity Measurement Accuracy | ± 5% RH |
| Wireless Range | Up to 100 feet line of sight |
Details model number, signal frequency, power, range, operating temperature, and package contents.
Lists required command classes for Z-Wave controller compatibility and recognition.
Provides contact information for technical support and troubleshooting assistance.
Step-by-step guide to adding the 4-in-1 sensor to your Z-Wave network.
Instructions for removing the 4-in-1 sensor from your Z-Wave network.
Details on setting the wake-up interval and manual wake-up.
Procedure to reset the device to its original factory settings.
Information on associating the sensor with other Z-Wave devices for communication.
Covers settings for temperature, humidity, light, motion sensors, and LED notifications.
Explains the function of the tamper switch and its alarm notification.
Instructions and recommendations for physically mounting the sensor indoors.
Details what the warranty covers, its duration, and exclusions.
Information regarding FCC compliance, interference, and operation conditions.
