1 Safety
HD509N-User’s Guide 2
During Installation
Do not place HD509N in an enclosed area where the cooling vents are blocked or
impede the flow of air through the ventilation openings.
Install so that its position does not interfere with its proper ventilation. For example,
do not place HD509N on a bed, sofa, rug, or similar surface that could block the
ventilation openings.
CAUTION!
Do not place anything on top of your HD509N set-top box, especially
other home entertainment components. Be sure to provide adequate
ventilation to prevent overheating.
ources such as radiators, heat registers, stoves, or
plifiers) that produce heat.
d as long as the air surrounding
Install HD509N on a hard flat surface not prone to vibration or impact and not on top
of another electronic device
Do not install near any heat s
other apparatus (including am
Installation of HD509N near consumer electronics devices, such as stereo
receiver/amplifiers and televisions, is permitte
HD509N does not exceed 40º C (104º F).
Do not install HD509N in an area where condensation occurs.
To prevent the temporary loss of guide data and cause a temporarily non-
responding HD509N, do not plug the AC power cord into a switched power outlet.
To Next Page
Loading...