Need help?Do you have a question about the ZALMAN Z3 Plus and is the answer not in the manual?
General| Motherboard Support | ATX, Micro-ATX, Mini-ITX |
|---|---|
| Material | Steel, Plastic |
| Expansion Slots | 7 |
| Maximum GPU Length | 360mm |
| Maximum CPU Cooler Height | 160mm |
| PSU Support | Standard ATX |
| Form Factor | Mid Tower |
| Cooling System | Front: 1 x 120mm (included), Rear: 1 x 120mm (included) |
| Front I/O Ports | Audio In/Out |
| Drive Bays | 2 x 5.25", 2 x 3.5", 2 x 2.5" |
Lists common components like bolts, standoffs, cable ties, HDD guides, and manuals.
Lists additional components specific to the Z3 Plus model, such as VGA guides and guide clips.
Details the function and location of front panel ports and controls, including power, reset, audio, USB, and fan controller.
Instructions on how to remove the side panel of the PC case for access.
Steps for installing the motherboard, including stand-off placement.
Guide on installing a graphics card, including PCI cover removal and fastening.
Information on the VGA support system to prevent warping and availability of optional fans.
Instructions for installing 5.25-inch and 3.5-inch drives.
Steps for removing the front cover of the PC case.
Instructions for installing Optical Disk Drives (ODD).
Guide for installing 3.5-inch external drives.
Instructions on using the HDD Guide to install 3.5-inch Hard Disk Drives.
Guides for connecting various internal and external cables.
Guides for connecting power buttons, fan controllers, and power LEDs to the motherboard.
Details on connecting front panel audio, reset, HDD LED, USB 2.0, and USB 3.0 cables to the motherboard.
Instructions for installing optional 2.5-inch HDDs and SSDs on the side of the case.
To Next Page
