ZALMAN Z7 NEO - RGB LED Controller; Fan Connectors; LED Control Button; DC Power Connector

14
Z7 NEO
11. RGB LED Controller
LED Control Button / 2Pin
- Connector to LED control button
- RGB LED Lighting e󰘯ects & 7 Colors
DC Power / 4Pin
- Connector to PSU
- Input : 12V
Motherboard Sync / 4Pin
- Connector to motherboard
- Requires motherboard that supports
RGB sync
※ Caution
Please be sure to check the arrow of the
female cable, it indicates where 12V needs
to be connected when you are connecting
it to motherboard.
12V G R B
Fan 1~8 / 6Pin
- Connector to RGB LED fans (Four pre-installed)
- RGB LED Fans I/O port 8ea
SW
IR
LE02
LE01
XWD
XWD
Connector to
PSU (4Pin)
Connector to
Motherboard (4Pin)
RGB LED Controller Position
SW
IR
LE02
LE01
LED + (12V)
LED + (12V)
Fan -
Fan -
Fan + (12V)
Fan + (12V)
G
G
R
R
B
B
ENG