Programme
1)
Water (l) Energy (kWh) Duration (min)
Machine Care 7.4 - 8.9 0.396 - 0.484 60
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes
can change the values.
2) In accordance with the 1016/2010 regulation
3) In accordance with the 2019/2022 regulation
Information for test institutes
To receive the necessary information for conducting
performance tests (e.g. according to EN60436), send an
email to:
info.test@dishwasher-production.com
In your request please include the product number code
(PNC) found on the rating plate.
For any other questions regarding your dishwasher
please refer to the service book provided with your
appliance.
Basic settings
You can configure the appliance by changing basic
settings according to your needs.
Number Settings Values
Description
1)
1 Water hardness From level 1 to lev-
el 10 (default: 5)
Adjust the level of the water softener according to the
water hardness in your area.
2 Rinse aid level From level 0 to lev-
el 8 (default: 5)
Adjust the level of the rinse aid according to the neces-
sary dosage.
3 End sound On
Off (default)
Activate or deactivate the acoustic signal for the end of
a programme.
4 Auto door open On (default)
Off
Activate or deactivate the AirDry.
5 Key tones On (default)
Off
Activate or deactivate the sound of the buttons when
pressed.
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in setting mode.
When the appliance is in setting mode, the indicators on
the control panel represent available settings. For each
setting, a dedicated indicator flashes:
30
To Next Page
Loading...
