6. Turn the cap of the salt container clockwise to
close the salt container.
Caution! Water and salt can come out of
the salt container when you fill it. After
you fill the salt container, immediately
start a programme to prevent corrosion.
How to fill the rinse aid dispenser
Caution! Only use rinse aid designed
specifically for dishwashers.
1. Press the release element (A) to open the lid (B).
2. Pour the rinse aid in the dispenser (C) until the
liquid reaches the marking "FILL".
3. Remove the spilled rinse aid with an absorbent
cloth to prevent excessive foam formation.
4. Close the lid. Make sure that the lid locks into
position.
Fill the rinse aid dispenser when the
indicator (D) is clear.
Daily use
1. Open the water tap.
2. Press and hold until the appliance is activated.
3. Fill the salt container if it is empty.
4. Fill the rinse aid dispenser if it is empty.
5. Load the baskets.
6. Add the detergent.
7. Select and start a programme.
8. Close the water tap when the programme is
complete.
Using the detergent
Caution! Only use detergent designed
specifically for dishwashers.
1. Press the release button (B) to open the lid (C).
2. Put the detergent in the compartment (A). You can
use detergent in tablets, powder or gel.
34
To Next Page
Loading...
