Cleaning the filters
The filter system is made of 3 parts.
1. Turn the filter (B) counterclockwise and remove it.
2. Remove the filter (C) out of filter (B).
3. Remove the flat filter (A).
4. Wash the filters.
5.
Make sure that there are no residues of food or soil
in or around the edge of the sump.
6. Put back in place the flat filter (A). Make sure that it
is correctly positioned under the 2 guides.
7. Reassemble the filters (B) and (C).
8. Put back the filter (B) in the flat filter (A). Turn it
clockwise until it locks.
Caution! An incorrect position of the
filters can cause bad washing results
and damage to the appliance.
38
To Next Page
Loading...
