Need help?Do you have a question about the Zanotti GM3 and is the answer not in the manual?
Use safety gloves to protect your hands from possible cuts.
Unit is not suitable for working in explosive environments.
Do not discharge refrigerant; recover with suitable equipment.
Warnings regarding safe handling during lifting and transport.
Instructions for straddle version installation, including cuts and fittings.
Instructions for optional thru-wall installation through the cold room wall.
Guidelines for connecting the unit to the mains power supply.
Ensure mains voltage and frequency match data plate values.
Use a suitable safety device (circuit breaker/ground fault interrupter) for connection.
Description and function of the control panel buttons and LEDs.
Procedure for starting the unit, including pre-checks and settings.
Common operational troubles and their potential causes.
Alarms for temperature, sensor faults, and wrong connections.
Use safety gloves to protect your hands from possible cuts.
Unit is not suitable for working in explosive environments.
Do not discharge refrigerant; recover with suitable equipment.
Warnings regarding safe handling during lifting and transport.
Instructions for straddle version installation, including cuts and fittings.
Instructions for optional thru-wall installation through the cold room wall.
Guidelines for connecting the unit to the mains power supply.
Ensure mains voltage and frequency match data plate values.
Use a suitable safety device (circuit breaker/ground fault interrupter) for connection.
Description and function of the control panel buttons and LEDs.
Procedure for starting the unit, including pre-checks and settings.
Common operational troubles and their potential causes.
Alarms for temperature, sensor faults, and wrong connections.
General| Application | Commercial |
|---|---|
| Defrosting | Automatic |
| Type | Upright Freezer |
| Energy Star Certified | No |
| Temperature Range | -22°C to -18°C |
To Next Page
