23
Electrical connection
Before initial start-up, refer to the appliance rating
plate to ascertain if supply voltage and current values
correspond with those of the mains at the installation
location.
e.g.: AC 220 ... 240 V 50 Hz or
220 ... 240 V ~50 Hz
(i.e. 220 to 240 volts alternating current, 50 Hertz)
The rating plate is inside the appliance on the left.
A correctly installed, earthed socket is required for
the electrical supply. The supply must have a fuse rat-
ingofatleast10Amps.
If the socket is not accessible once the appliance is
built in, the electrical installation must include suitable
means of isolating the appliance from the mains (e.g.
fuse, cut-out, current trip or similar with a minimum
contact separation of 3 mm).
Attention: The mains connection cable may only be
replaced by a skilled electrician. Please contact your
dealer or our customer service department for
repairs.
Appliance Description
View of Appliance
(various models)
Temperature regulator and
interior lighting
Butter and cheese compartment with lid
Door storage compartment
Bottle compartment
Fruit and vegetable trays
Shelves
General purpose box
(not included with all models)
Moisture regulation (not on all models)
Rating plate
Prior to Initial Start–Up
1. Please clean the appliance interior and all acces-
sories prior to initial start-up (see section: “Clean-
ing and Maintenance”).
To Next Page
Loading...
Need help?
General
