Why my Zanussi Refrigerator does not operate?
If your Zanussi Refrigerator isn't working, first, make sure it is switched on. Then, check if the mains plug is correctly connected to the mains socket. Also, test the socket by connecting another electrical appliance to see if there is voltage. If not, contact a qualified electrician.
What to do if water flows inside the Zanussi Refrigerator?
If water is flowing inside your Zanussi Refrigerator, ensure that food products are not blocking the water from flowing into the water collector by not touching the rear plate. Also, check if the water outlet is clogged and clean it if necessary.
How to fix the lamp in Zanussi Refrigerator?
If the lamp in your Zanussi Refrigerator isn't working, try closing and opening the door to ensure the lamp is not in stand-by mode. If that doesn't work, the lamp may be defective, and you should contact the nearest Authorised Service Centre.
Why is the temperature in my Zanussi ZBB27640SV too high?
If the temperature in your Zanussi Refrigerator is too low or too high, try these steps: * Adjust the temperature regulator to a higher or lower setting. * Ensure the refrigerator door is closed correctly. * Allow hot food products to cool to room temperature before storing them in the refrigerator.
How to reduce frost and ice in Zanussi ZBB27640SV Refrigerator?
If there's too much frost and ice in your Zanussi Refrigerator: * Make sure the door is closing correctly. Refer to "Closing the door" for guidance. * Ensure the water drainage plug is correctly positioned. * Check that the temperature is set correctly. Refer to "Operation" for instructions.
Why temperature cannot be set on Zanussi ZBB27640SV?
If you cannot set the temperature on your Zanussi Refrigerator, the "QuickFreeze function" might be on. Turn off the "QuickFreeze function" manually or wait for it to reset automatically. Refer to "QuickFreeze function" for more details.
What to do if water flows on the floor from Zanussi ZBB27640SV Refrigerator?
If water is flowing on the floor from your Zanussi Refrigerator, make sure the melting water outlet is connected to the evaporative tray above the compressor. Attach the melting water outlet to the evaporative tray.
Why does the compressor operate continually in Zanussi ZBB27640SV Refrigerator?
If the compressor in your Zanussi Refrigerator is constantly running: 1. Check the temperature setting, referring to "Operation" for correct settings. 2. If you recently added a large amount of food, wait a few hours and then check the temperature again.
What does it mean when all temperature setting LEDs flash on Zanussi ZBB27640SV?
If all the temperature setting LEDs on your Zanussi Refrigerator are flashing simultaneously, it indicates an error in measuring the temperature. Contact the nearest Authorised Service Centre. The cooling system will continue to keep food products cold, but temperature adjustment will not be possible.
Safety guidelines for children and vulnerable individuals regarding appliance use.
General safety precautions for appliance use, placement, and operation.
Crucial installation steps and electrical connection warnings for safe appliance setup.
Guidelines and warnings for the safe and correct use of the appliance.
How to adjust and set the desired temperature inside the appliance.
Common problems and their solutions for appliance malfunctions.
Key specifications and ratings of the appliance.
General| Door hinge | Right |
|---|---|
| Control type | Buttons |
| Product color | White |
| Built-in display | No |
| Reversible doors | Yes |
| Appliance placement | Built-in |
| Star rating | 4* |
| Freezer position | Bottom-placed |
| Freezing capacity | 4 kg/24h |
| Freezer net capacity | 87 L |
| Freezer gross capacity | 107 L |
| Freezer number of shelves/baskets | 4 |
| Storage time during power failure | 16 h |
| Lamp type | LED |
| Fridge net capacity | 154 L |
| Super Cool function | - |
| Fridge gross capacity | 157 L |
| Number of vegetable drawers | 2 |
| Fridge number of shelves/baskets | 3 |
| Noise level | 39 dB |
| Climate class | SN-T |
| Total net capacity | 241 L |
| Minimum operating temperature | 10 °C |
| Connected load | - W |
| AC input voltage | 230 - 240 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A+++ to D |
| Annual energy consumption | 304 kWh |
| Cord length | 2.4 m |
Weight and Dimensions| Depth | 549 mm |
|---|---|
| Width | 540 mm |
| Height | 1772 mm |
To Next Page