What to do if the Zanussi ZBB28430SL Refrigerator is not operating?
If your Zanussi Refrigerator isn't working, first ensure that it is switched on. Then, check that the mains plug is correctly connected to the mains socket. Finally, test the mains socket by connecting a different electrical appliance; if that doesn't work, contact a qualified electrician.
Why is there too much frost and ice in my Zanussi ZBB28430SL?
Excessive frost and ice in your Zanussi Refrigerator can be due to a few reasons: the door might not be closing properly, or the gasket is deformed or dirty (refer to "Closing the door"), the water drainage plug may not be correctly positioned (position the water drainage plug in the correct way), or food products might not be wrapped properly (wrap them better).
What to do if water flows inside my Zanussi Refrigerator?
If you notice water inside your Zanussi Refrigerator, it could be because the water outlet is clogged (clean the water outlet) or food products are blocking water from flowing into the water collector (make sure that food products do not touch the rear plate).
Why is my Zanussi ZBB28430SL so noisy?
Your Zanussi Refrigerator might be making excessive noise because it's not standing on a stable surface. Check if the appliance stands stable.
What to do if the lamp in my Zanussi ZBB28430SL Refrigerator doesn't work?
If the lamp in your Zanussi Refrigerator isn't working, first check if it's in stand-by mode by closing and opening the door. If that doesn't solve the issue, the lamp may be defective (refer to "Replacing the lamp").
What to do if the temperature in my Zanussi ZBB28430SL Refrigerator is too low or too high?
If the temperature in your Zanussi Refrigerator is not optimal, try these steps: Adjust the temperature regulator to a higher or lower setting. Ensure the door is closed correctly (refer to "Closing the door"). Allow warm food to cool before storing. Store fewer items at once. Defrost the appliance if frost is thicker than 4-5 mm. Only open the door when necessary. Ensure proper cold air circulation inside.
How to fix water flowing on the floor from my Zanussi Refrigerator?
If water is flowing on the floor from your Zanussi Refrigerator, the melting water outlet might not be connected to the evaporative tray above the compressor. Attach the melting water outlet to the evaporative tray.
Why is my Zanussi Refrigerator compressor always running?
Your Zanussi Refrigerator's compressor might be running continually due to several reasons. The temperature might be set incorrectly (refer to "Operation"), you may have put too many food products in at the same time (wait some hours and then check the temperature again), the room temperature could be too high (refer to the climate class chart on the rating plate), food products placed inside were too warm (allow them to cool to room temperature first), or the door isn't closed correctly (refer to "Closing the door").
General| Brand | Zanussi |
|---|---|
| Model | ZBB28430SL |
| Category | Refrigerator |
| Language | English |
To Next Page