To Next Page
K
Kathryn MosleySep 12, 2025
Why is my Zanussi ZDC8203W cycle time too long and the drying result unsatisfactory?
- MMarissa HuntSep 12, 2025
If your Zanussi Dryer cycle is taking too long or the drying result isn't satisfactory, several factors could be at play. Ensure the laundry weight matches the program. A clogged filter can also cause this, so make sure to clean it. Other potential causes include a clogged condenser, overloading the appliance with too much laundry, a dirty drum, incorrect conductivity sensor settings (refer to the 'Settings - Adjustment of the remaining laundry moisture degree' chapter for guidance), clogged airflow slots, or unsuitable room temperature. The room temperature should be higher than +5°C and lower than +35°C; the optimal range is 19°C to 24°C. You can also try setting the Minuterie (Time Drying) or the Très Sec (Extra Dry) program.
General
