How to fix a Zanussi Refrigerator that does not operate?
If your Zanussi Refrigerator isn't working, first, ensure that it is switched on. Then, check if the mains plug is correctly connected to the mains socket. Also, verify that there is voltage in the mains socket by connecting a different appliance or contacting a qualified electrician.
Why is there too much condensed water on the rear wall of my Zanussi Refrigerator?
If there is too much condensed water on the rear wall of your Zanussi Refrigerator, it could be due to a few reasons. First, ensure that you are not opening the door too frequently, open the door only when necessary. Second, check that the door is closed completely. Finally, make sure stored food is wrapped in suitable packaging before placing it in the refrigerator.
Why is there too much frost and ice in my Zanussi ZEAN82FR Refrigerator?
If there is too much frost and ice in your Zanussi Refrigerator, refer to "Closing the door" section to ensure it is closed correctly. Also, refer to "Closing the door" section to check if the gasket is deformed or dirty. Wrap food products properly. Refer to "Control Panel" chapter to ensure the temperature is set correctly. If the appliance is fully loaded and set to the lowest temperature, set a higher temperature by referring to "Control Panel" chapter.
Why is my Zanussi ZEAN82FR so noisy?
If your Zanussi Refrigerator is making unusual noises, check if the appliance stands stable.
Why does the compressor operate continually in my Zanussi ZEAN82FR?
If your Zanussi Refrigerator's compressor is running continuously, it might be due to several factors. Check if the temperature is set incorrectly. Also, if you recently added many food products, wait a few hours and check the temperature again. Ensure that food products are cooled to room temperature before storing them. If the door is not closed correctly, refer to "Closing the door" section. Finally, check if the FastFreeze function is switched on and refer to "FastFreeze function" section.
What to do if the temperature in my Zanussi Refrigerator is too low or too high?
If the temperature in your Zanussi Refrigerator is too low or too high, adjust the temperature accordingly. If the door isn't closed properly, refer to "Closing the door" section. Ensure food products cool to room temperature before storing them, and avoid storing too many items at once. Defrost the appliance if the frost thickness exceeds 4-5 mm and avoid opening the door unnecessarily. If the FastFreeze function is on, refer to "FastFreeze function" section.
Why can't I set the temperature on my Zanussi ZEAN82FR Refrigerator?
If you cannot set the temperature on your Zanussi Refrigerator, it might be because the "FastFreeze function" is switched on. You can either manually switch off the "FastFreeze function" or wait until it deactivates automatically. Refer to "FastFreeze function" section.
Why is water flowing inside my Zanussi ZEAN82FR Refrigerator?
If water is flowing inside your Zanussi Refrigerator, ensure that food products are not preventing water from flowing into the water collector by making sure that food products do not touch the rear plate. Also, check if the water outlet is clogged and clean it if necessary.
Why does the door of my Zanussi ZEAN82FR not open easily?
If the door of your Zanussi Refrigerator does not open easily, wait a few seconds between closing and re-opening the door.
What to do if the temperature set in the Zanussi Refrigerator is too low and the ambient temperature is too high?
If the temperature set in your Zanussi Refrigerator is too low and the ambient temperature is too high, set a higher temperature by referring to "Control Panel" chapter.
General| Category | Refrigerator |
|---|---|
| Type | Freestanding |
| Energy efficiency class | F |
| Noise level | 39 dB |
| Colour | White |
| Number of Shelves | 4 |
To Next Page
