Zanussi ZEV6340NBA - User Manual

Questions and Answers

R
Regina DavisAug 8, 2025
Why I cannot activate or operate my Zanussi ZEV6340NBA?
- E
  elizabeth48Aug 8, 2025
  If your Zanussi hob won't activate or operate, several factors could be at play. First, ensure the hob is properly connected to the electrical supply, consulting the connection diagram for verification. A blown fuse could also be the culprit; if it repeatedly blows, consult a qualified electrician. Avoid touching multiple sensor fields simultaneously, and ensure the control panel is free from water or fat stains, cleaning it if necessary.
J
jeffersontimothyAug 13, 2025
What to do if Zanussi ZEV6340NBA deactivates and makes a sound?
- R
  Robert HuntAug 14, 2025
  If your Zanussi hob deactivates and an acoustic signal sounds, it's likely that something is placed on one or more of the sensor fields. Remove any objects from the sensor fields to resolve this.
H
Harry LewisAug 18, 2025
What to do if my Zanussi ZEV6340NBA Hob deactivates itself?
- C
  Christopher HuangAug 18, 2025
  If your Zanussi hob deactivates unexpectedly, it may be due to an object being placed on the sensor field. Make sure to remove anything that might be on the sensor field.
C
Carrie FitzpatrickAug 23, 2025
What does E6 mean on my Zanussi ZEV6340NBA?
- K
  Karina DeanAug 25, 2025
  If 'E6' appears on your Zanussi hob, it indicates that the second phase of the power supply is missing. To address this, check that the hob is correctly connected to the electrical supply. Also, remove the fuse, wait one minute, and then reinsert it.
Y
ymasseyAug 28, 2025
Why are the sensor fields on my Zanussi ZEV6340NBA Hob becoming hot?
- B
  Brandon ReidAug 28, 2025
  If the sensor fields of your Zanussi hob are getting too hot, it might be because the cookware you're using is too large or placed too close to the controls. Where possible, use the rear zones for larger cookware to avoid this issue.
E
Edwin PriceSep 2, 2025
Why doesn't the residual heat indicator come on my Zanussi hob?
- W
  Walter PerrySep 2, 2025
  If the residual heat indicator on your Zanussi hob isn't turning on, it could be because the zone wasn't hot enough, as it only operated for a short duration. If the zone operated for a sufficient amount of time to be hot, you should contact an Authorised Service Centre.