How to reduce frost and ice buildup in my Zanussi Freezer?
If there is too much frost and ice in your Zanussi Freezer, make sure the door is closed correctly and the gasket is not deformed or dirty, referring to the "Closing the door" section. Also, ensure the water drainage plug is correctly positioned. Wrap food products properly. Finally, check if the temperature is set correctly, referring to the "Operation" chapter.
Why is the power indicator light flashing on my Zanussi ZFT10210WA?
If the power indicator light is flashing on your Zanussi Freezer, it could indicate an error in measuring the temperature, the appliance is not working properly, or the temperature in the appliance is too high. In any of these cases, contact a qualified electrician or the nearest Authorized Service Centre.
Why is the temperature in my Zanussi Freezer too low or too high?
If the temperature in your Zanussi Freezer is too low or too high, try the following: set a higher or lower temperature using the temperature regulator. Ensure the door is closed correctly. Allow the temperature of warm food products to decrease to room temperature before storing them. Avoid storing too many food products at the same time. Defrost the appliance if the frost is thicker than 4-5 mm. Open the door only when necessary. Check if the FastFreeze function is on and refer to the FastFreeze function section.
What to do if my Zanussi ZFT10210WA Freezer does not operate?
If your Zanussi Freezer isn't operating, first, ensure that the appliance is switched on. Next, check that the mains plug is correctly connected to the mains socket. Finally, test the socket by connecting another electrical appliance to see if there is a voltage. If not, contact a qualified electrician.
Why does the compressor operate continually in my Zanussi ZFT10210WA?
If your Zanussi Freezer's compressor is running continually, the temperature might be set incorrectly, so refer to the "Operation" chapter. It could also be due to putting too many food products in at once; wait a few hours and then check the temperature again. Finally, the room temperature might be too high, so refer to the climate class chart on the rating plate.
What to do if the audible or visual alarm is on in my Zanussi ZFT10210WA Freezer?
If the audible or visual alarm is on in your Zanussi Freezer, it might be because the cabinet has been recently switched on or the temperature in the appliance is too high. Refer to the "Door Open Alarm" or "High Temperature Alarm" sections for guidance.
Why doesn't the door of my Zanussi ZFT10210WA Freezer open easily?
If the door of your Zanussi Freezer does not open easily, wait a few seconds between closing and re-opening the door.
Why temperature cannot be set on my Zanussi ZFT10210WA?
If you cannot set the temperature on your Zanussi Freezer, it may be because the FastFreeze function is switched on. Switch off FastFreeze manually, or wait until the function re-sets automatically to set the temperature. Refer to "FastFreeze function".
Why doesn't the compressor start immediately after pressing the FastFreeze on my Zanussi Freezer?
The compressor starts after a period of time.
What to do if the door is misaligned on my Zanussi Freezer?
If the door of your Zanussi Freezer is misaligned or interferes with the ventilation grill, the appliance is not levelled. Refer to "Levelling".
General| Type | Upright Freezer |
|---|---|
| Energy Efficiency Class | F |
| Number of Freezer Compartments/Shelves | 3 |
| Height | 85 cm |
| Width | 55 cm |
| Depth | 58 cm |
| Freezing capacity | 10 kg/24h |
| Colour | White |
| Defrost System | Manual |
| Weight | 32 kg |
| Climate class | SN-T |
Guidelines for the safe use of the appliance by children and vulnerable individuals.
General safety precautions for using the appliance in various household and commercial settings.
Instructions and warnings related to the proper installation of the appliance.
Precautions and guidelines for connecting the appliance to the electrical supply.
Description of the control panel elements and their functions.
Step-by-step guide on how to turn on the appliance after installation.
Instructions for safely turning off and disconnecting the appliance.
Explanation of the red alarm light and its meaning, including troubleshooting.
Guidance on adjusting the temperature settings for optimal cooling.
Instructions for using the fast freeze feature for rapid freezing of food.
Description of normal sounds the appliance may make during operation.
Tips to optimize energy consumption and reduce electricity costs.
Advice and best practices for effective freezing of food.
Methods and considerations for thawing frozen food safely.
Recommendations for storing frozen food to maintain quality and safety.
General safety warnings and precautions before performing maintenance.
Instructions for cleaning the inside of the appliance.
Guidelines for regular cleaning of the appliance's interior and exterior.
Step-by-step guide on how to defrost the freezer compartment.
Common problems and their solutions for appliance operation.
Guidelines for selecting the optimal location and environment for the appliance.
Instructions on how to ensure the appliance is level for proper operation.
Advice on placing the appliance away from heat sources and ensuring ventilation.
Step-by-step instructions for reversing the appliance door.
Detailed instructions for safely connecting the appliance to the power supply.
Information and guidance on recycling and proper disposal of the appliance.
To Next Page
