THINGS YOU NEED TO KNOW
WARNINGS:
This cooker must be installed by a qualified
electrician/competent person. Safety may be
impaired if installation is not carried out in
accordance with these instructions.
This cooker must be earthed.
Do not remove the screws from the earth tab
extending from the oven mains terminal block
(Fig. 1).
Before connecting the cooker make sure that
the voltage of your electricity supply is the
same as that indicated on the rating plate.
The rating plate can be seen by opening the
top oven door and looking below the oven
door seal.
Do not alter the electrical circuitry of this
cooker.
CHOICE OF ELECTRICAL
CONNECTION
The cooker should be operated using at least
6mm² twin core and earth PVC insulated
multicore cable. Please choose from the most
appropriate after reading the descriptions:
By connecting the cooker to a cooker point
having a double pole isolating switch
providing at least 3mm contact separation in
all poles and protected with a fuse or
miniature circuit breaker at your mains fuse
box.
If you wish to connect an oven and a hob to a
cooker point you can, by connecting the oven
and hob separately to the cooker point. See
Fig. 2.
48
INSTALLATION INSTRUCTIONS
WARNINGS:
Fig. 1
Fig. 2
To Next Page
Loading...
Need help?
General
