Why Zanussi ZOD35802BK Oven does not heat up?
Your Zanussi oven might not be heating up for several reasons. First, ensure that the oven is activated. Also, check if the clock is properly set. Incorrect settings could also be the cause, so verify they are correct. Finally, a blown fuse could be the issue; if the fuse continues to blow, consult a qualified electrician.
What to do if the display shows "12.00" on my Zanussi ZOD35802BK?
If your Zanussi oven's display shows "12.00", it likely indicates that there was a power cut. Resetting the clock should resolve this issue.
What to do if the lamp does not operate in Zanussi ZOD35802BK Oven?
If the lamp in your Zanussi oven is not working, the cause is likely a defective lamp. Replace the lamp to resolve the issue.
Why I can't activate my Zanussi Oven and the display shows “400”?
If you cannot activate or operate your Zanussi oven, and the display shows “400” accompanied by an acoustic signal, it suggests that the oven is incorrectly connected to the electrical supply. Check if the oven is correctly connected to the electrical supply (refer to the connection diagram if available).
How to fix steam and condensation in my Zanussi Oven?
If you notice steam and condensation settling on the food and inside your Zanussi oven, it's likely because the dish was left in the oven for too long after cooking. To prevent this, do not leave dishes in the oven for more than 15 to 20 minutes after the cooking process ends.
General| Energy Efficiency Class | A |
|---|---|
| Control Type | Electronic |
| Oven size | Large |
| Number of ovens | 1 |
| Colour | Black |
| Power | 2800 W |
| Door Material | Glass |
| Timer | Yes |
To Next Page
