EasyManua.ls Logo

Zanussi ZSFN121W1 - User Manual

Zanussi ZSFN121W1
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GETTING
STARTED?
EASY.
User Manual
ZSFN121W1
EN User Manual
Dishwasher

Table of Contents

Questions and Answers

  • S
    sloganAug 20, 2025
    What to do if my Zanussi ZSFN121W1 does not fill with water?
    • S
      smithtimothyAug 20, 2025
      If your Zanussi Dishwasher isn't filling with water, the indicator light might be flashing once intermittently, and the start button light could be flashing continuously. Ensure that the water tap is fully open. Also, check that the water supply pressure isn't too low by contacting your local water authority. Make sure the water tap and the filter in the inlet hose aren't clogged, and that the inlet hose has no kinks or bends.
  • A
    Ashley Daugherty DDSAug 22, 2025
    What to do if my Zanussi ZSFN121W1 does not drain the water?
    • R
      Russell BuckAug 22, 2025
      If your Zanussi Dishwasher is not draining water and the indicator light flashes twice intermittently while the start button light flashes continuously, make sure that the sink spigot is not clogged. Also, ensure that the interior filter system is not clogged and that the drain hose has no kinks or bends.
  • G
    George CastroAug 25, 2025
    How to fix a small leak from Zanussi ZSFN121W1 Dishwasher door?
    • V
      Vanessa CummingsAug 25, 2025
      If you notice a small leak from the door of your Zanussi Dishwasher, it could be that the appliance is not levelled. Try loosening or tightening the adjustable feet (if applicable). Also, the appliance door might not be centred on the tub; adjust the rear foot if applicable.
  • D
    David ParrishAug 26, 2025
    What to do if the anti-flood device is on in my Zanussi ZSFN121W1 Dishwasher?
    • J
      Jason FranklinAug 26, 2025
      If the anti-flood device on your Zanussi Dishwasher is activated, and the indicator light flashes three times intermittently while the start button light flashes continuously, close the water tap. Also, make sure that the appliance is correctly installed and that the baskets are loaded as instructed in the user manual.
  • M
    Melissa TaylorAug 27, 2025
    Why Zanussi ZSFN121W1 programme does not start?
    • R
      Regina PriceAug 28, 2025
      If the programme on your Zanussi Dishwasher does not start, ensure that the appliance door is properly closed and press the start button. If the delay start is set, either cancel the setting or wait for the countdown to finish. Also, the appliance may be recharging the resin inside the water softener, which takes approximately 5 minutes.
  • J
    James MartinAug 30, 2025
    What to do if Zanussi ZSFN121W1 Dishwasher water temperature is too high?
    • A
      Ashley Woods DDSAug 30, 2025
      If the temperature of the water inside your Zanussi Dishwasher is too high, or if there's a malfunction of the temperature sensor, and the indicator flashes six times intermittently while the start button light flashes continuously, make sure that the temperature of the inlet water does not exceed 60°C. You can also try switching the appliance off and on.
  • S
    Steven BerryAug 31, 2025
    Why does my Zanussi Dishwasher trip the circuit-breaker?
    • J
      jtorresAug 31, 2025
      If your Zanussi Dishwasher trips the circuit-breaker, it could be due to insufficient amperage to supply all appliances in use simultaneously. Check the socket amperage and the capacity of the meter, or turn off one of the appliances in use.
  • J
    jessica56Sep 2, 2025
    What to do for malfunction of the water level detection sensor in Zanussi ZSFN121W1 Dishwasher?
    • C
      Cynthia WilliamsSep 2, 2025
      If there is a malfunction of the water level detection sensor in your Zanussi Dishwasher, and the indicator flashes four times intermittently while the start button light flashes continuously, make sure that the filters are clean. Also, try switching the appliance off and on.
  • S
    Sara MatthewsSep 4, 2025
    What to do if the water level is too high in Zanussi ZSFN121W1?
    • M
      Meghan MoranSep 4, 2025
      If the level of water inside your Zanussi Dishwasher is too high, and the indicator flashes 15 times intermittently while the start button light flashes continuously, try switching the appliance off and on. Also ensure that the filters are clean and that the outlet hose is installed at the right height above the floor, referring to the installation instructions.
  • K
    Kayla ThorntonSep 6, 2025
    What to do if there is a technical malfunction of my Zanussi Dishwasher?
    • K
      Katherine RussellSep 6, 2025
      If there is a technical malfunction of your Zanussi Dishwasher, and the indicator flashes 12 times intermittently while the start button light flashes continuously, try switching the appliance off and on.

Zanussi ZSFN121W1 Specifications

General IconGeneral
Appliance placementFreestanding
Control typeElectronic
Washing Capacity12 place settings
Number of place settings12
Noise Level49 dB
Number of Programs5
Washing classA
Drying classA
Width60 cm
Height85 cm
Energy Efficiency ClassA++
Delay StartYes
Half LoadNo
Delay Start (up to)24 hours
Number of washing programs5
Water Consumption per cycle11 liters
ProgramsEco, Intensive, Normal, Quick
Water Consumption11 liters

Related product manuals