Why does water flow on the rear plate of my Zanussi Refrigerator?
If water flows on the rear plate of your Zanussi refrigerator, it is because, during the automatic defrosting process, frost melts on the rear plate. This is correct. Dry the water with a soft cloth.
Why doesn't the lamp work in my Zanussi ZTAE24EW0 Refrigerator?
If the lamp in your Zanussi Refrigerator isn't working, first, close and open the door to see if the lamp is in stand-by mode. If that doesn't work, contact the nearest Authorized Service Centre because the lamp may be defective.
What to do if water flows inside my Zanussi ZTAE24EW0 Refrigerator?
If water is flowing inside your Zanussi Refrigerator, it might be because food products are blocking the water from flowing into the water collector; ensure food products do not touch the rear plate. Another reason could be that the water outlet is clogged; try cleaning the water outlet.
What to do if the temperature in my Zanussi Refrigerator is too low or too high?
If the temperature in your Zanussi Refrigerator is too low or too high, the temperature may not be set correctly. Set a higher or lower temperature. Also, make sure that the door is closed correctly.
Why is there too much frost and ice in my Zanussi ZTAE24EW0?
Excessive frost and ice in your Zanussi Refrigerator can occur if the door isn't closed correctly. Food products that are not wrapped properly can also cause this. Make sure to wrap the food products better. Also, make sure that the temperature is set correctly. If the appliance is fully loaded and set to the lowest temperature, set a higher temperature. If the temperature set in the appliance is too low and the ambient temperature is too high, set a higher temperature.
Why is there too much condensed water on the rear wall of my Zanussi ZTAE24EW0 Refrigerator?
If you notice too much condensed water on the rear wall of your Zanussi Refrigerator, it could be due to a few reasons. You might be opening the door too frequently; try to open it only when necessary. Also, ensure the door is closed completely after each use. Lastly, make sure that all stored food is properly wrapped in suitable packaging.
Why is my Zanussi Freezer so noisy?
If your Zanussi Freezer is making too much noise, check if the appliance stands stable.
How to reduce frost and ice buildup in my Zanussi Freezer?
If there's too much frost and ice in your Zanussi Freezer, make sure the door is closing properly. Also, ensure food products are wrapped well. If these steps don't resolve the issue, consider adjusting the temperature and refer to the "Operation" chapter.
General| Brand | Zanussi |
|---|---|
| Model | ZTAE24EW0 |
| Category | Refrigerator |
| Language | English |
To Next Page
