Why Zanussi ZWD96SB4PW Washer/Dryer washing results are not satisfactory?
If you're not satisfied with the washing results from your Zanussi Washer/Dryer, try increasing the detergent quantity or switching to a different detergent. For stubborn stains, pretreat them with special stain removal products. Also, ensure you're setting the correct temperature and avoid overloading the machine.
Why is there too much foam in the drum during Zanussi Washer/Dryer washing cycle?
If you notice too much foam in the drum of your Zanussi Washer/Dryer during the wash cycle, try reducing the amount of detergent you're using, or use fewer tablets or single-dose detergents.
What does internal fail mean for Zanussi ZWD96SB4PW Washer/Dryer?
If your Zanussi Washer/Dryer displays an internal failure message, it indicates a communication problem between electronic components. First, try switching the appliance off and on again. If the error persists, contact an authorized service center.
General| Type | Washer/Dryer |
|---|---|
| Washing Capacity | 9 kg |
| Drying Capacity | 6 kg |
| Spin Speed | 1600 rpm |
| Colour | White |
| Delay Start | Yes |
| Child Lock | Yes |
| Noise Level (Washing) | 53 dB(A) |
| Noise Level (Spinning) | 76 dB(A) |
To Next Page