What to do if my Zanussi ZYAN9EW0 Freezer is not operating?
If your Zanussi Freezer isn't working, first ensure it's switched on. Then, check that the mains plug is correctly connected to the mains socket. Finally, test the socket with another appliance to confirm it has voltage; if not, contact a qualified electrician.
Why is there too much frost and ice in my Zanussi ZYAN9EW0 Freezer?
Excessive frost and ice in your Zanussi Freezer can be due to several reasons. Check if the door is not closed correctly. Improperly wrapped food products can also contribute to this issue. Also, incorrect temperature settings, a fully loaded appliance at the lowest temperature, or a low temperature setting combined with a high ambient temperature can cause too much frost and ice. Try to wrap the food products better.
Why is my Zanussi ZYAN9EW0 compressor running constantly?
Your Zanussi Freezer's compressor might run constantly if the temperature is set incorrectly. Also, putting too many food products in at once, having a high room temperature, placing warm food inside, a door not closed correctly, or the FastFreeze function being on can cause this issue. Try to solve the problem by checking these possible causes.
What to do if the temperature in my Zanussi Freezer is too low or too high?
If the temperature in your Zanussi Freezer is too low or too high, it could be due to several factors. Ensure the temperature is set correctly. Also, check if the door is not closed properly, or the food products' temperature is too high before storing. Storing too many food products at once, excessive frost buildup, frequent door openings can also affect the temperature. If there is too much frost, defrost the appliance. Try to open the door only if necessary and store less food products at the same time.
Why can't I set the temperature on my Zanussi Freezer?
You may be unable to set the temperature on your Zanussi Freezer if the FastFreeze function is switched on. To adjust the temperature, switch off the FastFreeze function manually, or wait until the function deactivates automatically.
Why doesn't the compressor start immediately on my Zanussi ZYAN9EW0 Freezer?
If the compressor in your Zanussi Freezer doesn't start immediately after pressing "FastFreeze" or changing the temperature, it's normal. The compressor starts after a period of time; no error has occurred.
To Next Page
General
