To put the network into “Upgrade”:
1) Turn off all network devices and set switch 5 of each to the on
position.
2) Connect the PC to the network with the mini USB cable.
3) Power up the system.
4) Open the Zapco DPN program.
The system will come up in Upgrade Mode as in screen 1 above.
5) Click “Start Upgrade.
6) Screen 2 indicates the first unit has been upgraded.
7) Go to Devices (Screen 3) and chose the next device in the network.
8) Repeat the upgrade process for each device in the network.
9) Shut down the network, turn upgrade switches off and restart
network.
To Next Page
Loading...
Need help?
General