Need help?Do you have a question about the Zapi ECO SMART and is the answer not in the manual?
Details technical specs like voltage, interface, buttons, protection, temperature ranges.
Explains the functions of built-in LEDs and the alphanumeric LCD display, including display elements.
Lists necessary materials for correct installation and mentions potential issues.
Provides critical safety instructions before and during hardware installation.
Details protection against connection errors and external agents (IP65).
Discusses design according to safety specifications and manufacturer responsibility.
Lists pin assignments for the CNA Molex Minifit 6-pin connector.
Provides detailed mechanical dimensions and panel cut-out information.
Explains how parameters and display configuration are made using the Digital Console.
Details the console, its display, and button functions for operation.
Explains how to select performance modes using keyboard buttons on the MAIN PAGE.
Details how to access and manage passwords within the SERVICE MENU.
Describes how to use the dashboard as a Zapi digital console via the SERVICE MENU.
Lists specific alarms like "EEPROM KO", "CAN BUS KO TRAC", and "SERVICE REQUIRED".
Explains how alarm codes and module information are displayed on the Eco Smart Display.
To Next Page
General