©2014-2018 ZappBug. All rights reserved. Product specications subject to change. To learn more, please visit us at ZappBug.com 9
Use & Operation
1. Unfold the Heater
2. Connect Heating Unit
Note: It is normal for one side of the oven to appear warped. This allows
the oven to easily fold and does not affect functionality. If warping
appears excessive, shake oven to ensure that each side panel is fully
extended.
Locate Ventilation Tube Place Base of Heating Unit
In Tube
Stretch Tube Around Heater
(Observe “Do Not Cover” markings)
Note: It is normal for small gaps to appear between the textured side of the
Heating Unit and the Ventilation Tube. Bed bugs will not escape through these
gaps if the Heating Unit is on. Bed bugs experience thermal shock and are not
capable of moving toward the Heating Unit. Always ensure that Heating Unit
is on when placing potentially infested items inside the ZappBug Heater
TM
.
Support Block
One-Touch Timer
Support Net
ZappBug
TM
Heating Unit
Carry Bag & Folding Oven
Wireless Thermometer
X2
X1
X1
X1
X1
X1
Components Included
The Following components are required for proper use of this product. If you did
not receive all of the components listed below, contact ZappBug immediately
(email: service@ZappBug.com). Some components may appear different from the
representations below.
To Next Page
Loading...
Need help?
General