©2014-2018 ZappBug. All rights reserved. Product specications subject to change. To learn more, please visit us at ZappBug.com 11
Use & Operation (continued)
3. Select Appropriate Support Conguration
The ZappBug Heater’s unique and modular support system is designed to
accommodate a wide range of items. Support blocks allow for ventilation around
rigid, heavy items such as luggage and small furniture. A combination of Support
Blocks and the Support Net allow for ventilation around loose items such as books
andclothing.Selecttheappropriatesupportcongurationforyouritemsasshown
below.Itiscriticalthatairisallowedtoowfreelyaroundtheitemsyouareheat
treating.
Ifaircannotowfreelyintheunititwilltakelongertoreach120
o
F. If items are
placedtooclosetotheheaters,orifairowinsidetheunitiscompletelyobstructed,
it is possible that your heater’s internal safety fuse will pop. Always make sure that
aircanowfreelyintheunitandhotairisnottrappedatthesource.Whenever
possible do not allow items to touch the sides, top, or bottom of the unit to ensure
adequateairow.
Attach All Sides of Support Net
to loops X6 located inside
Place Support X2 Blocks under
Support Net
Note: Think of this process the same way you would think of drying items in the
sun. If items are densely packed, they take longer to dry. Better air circulation
will heat your items faster and ensure bed bug killing temperatures. Always
use included thermometer to ensure that temperatures reach the lethal 120
o
F
(49
o
C). See step 10.
Use & Operation (continued)
4. Insert Items For Treatment
5. Wireless Thermometer Setup
Place items inside the ZappBug Heater
TM
ontopofSupportBlocks/SupportNet.To
ensure adequate airow, items should not touch walls or ceiling of the chamber.
Place wireless thermometer probe inside deepest (most insulated) location in
items being treated. After that, zip the top cover closed.
Hint: Always open luggage and “uff” items to ensure air circulation. If items are
densely packed, they take longer to heat.
The ZappBug Heater
TM
comes with an included thermometer base station and a
remote probe, pictured below.
Thermometer Base Station
Thermometer Probes
Note: Setup Thermometer
BaseStationrst