ZappBug Oven - Support Configuration; Turning On the Heater

©2012 ZappBug. All rights reserved. Product specications subject to change. 8
Use & Operation (continued)
3. Select Appropriate Support Conguration
The ZappBug Oven’s unique and modular support system is designed to
accommodate a wide range of items. Support blocks allow for ventilation around
rigid, heavy items such as luggage and small furniture. A combination of Support
Blocks and the Support Net allow for ventilation around loose items such as books
and clothing. Select the appropriate support conguration for your items as shown
below. It is critical that air is allowed to ow freely around the items you are heat
treating.
Support Blocks with NetSupport Blocks
Attach All Sides of Support Net
to Velcro Strips in Oven
4. Turn On Heater
Plug heater into included Belkin timer. After that, plug Belkin
timer into electrical outlet. Make sure that six (6) hours is selected
on the side of the Belkin timer. Press the “on” button located at
the top of the Belkin timer.
Safety Note: The ZappBug Heater draws 1500 watts of electrical power. Do not
use extension cords rated below 1500 watts.
Included Belkin Timer