19
10. Folding and Storing the ZappBug Room
Use & Operation (continued)
8. Run Time
Bed bugs die at temperatures of 120°F or above in less than two minutes. The
higher the temperature, the less time it takes to kill them. The standard practice
for heat treating is to measure the temperature at one, representative location.
When the temperature at this location reaches 120°F and is held at 120°F (or
above) for one or more hours, the heat treatment is complete.
Once the remote sensor reaches a
temperature of 120°F or above, run the
ZappBug thermal unit for 60 minutes.
9. Remove Items After Heat Treatment
Hint: If your home is infested with bed bugs, place all treated items into sealed
plastic bags or containers immediately after heat treatment to prevent re-ex-
posure.
Turn off and unplug all ZappBug thermal units. Reverse steps 1-5 and store the
ZappBug Room and accessories in the two included carry bags.
IMPORTANT SAFETY INORMATION: Items may be hot after heat treatment. Wait
for items to cool before handling. Items such as metal zippers can remain hot
after heat treatment and cause burns.
To Next Page
Loading...
Need help?
General