ZAPTEC Go - Installation Steps: Cover and Mounting; Remove the Front Cover; Mount the Charging Station

8 9
Status light indicator
No light
Updating firmware.
This normally takes a few minutes.
Error detected. Unplug vehicle and restart
the charging station. If this does not clear
the red light, contact your installer.
Waiting to be configured by an authorized
installer.
Waiting for authentication.
Authenticate with your app or key fob.
Charging complete or charging is waiting
for scheduled start.
Charging.
Standby.
Check charger power.
Purple
Red
Orange
Yellow
Green
Blue
White
English