7
Connecting the charging station to WiFi or 4G
ZAPTEC Home is supplied with built-in mobile communication via the Telenor
4G LTE-M network and will automatically connect to this as soon as the
charging station is connected to power. If it would be preferable to connect the
charging station to the local WiFi rather than 4G, this can easily be done by
conguring WiFi using the ZAPTEC mobile app.
We recommend testing the coverage at the installation site using your own
mobile prior to installation. A mobile with a Telenor SIM must be used to
ensure accurate measurement.
Coverage map: https://www.gsma.com/iot/deployment-map/
Installation
When using 4G in ZAPTEC Home, you will not need to congure
communication with the charging station using the mobile app. The charging
station will automatically connect to the mobile network as soon as it is
connected to power during installation.
Electricity network and other relevant settings must still be congured via the
mobile app, see Item 8.
ZAPTEC Home must be connected to WiFi or 4G in order to
communicate with the ZAPTEC Portal
i
To Next Page
Loading...
Need help?
General
