ZAPTEC Pro - Adding Users to Installation; Locking the Charging Cable; Reading Error Codes

11
English
Adding Users to the Installation
The installation owner can add users of the system by going to ‘access’. Here, new users
can be added, invited or removed from the system. This assumes that authentication
(user control) has been activated on the installation.
Locking the Charging Cable for the Charging Station
The charging cable can be locked permanently to the charging station. This feature is
activated via the Zaptec app.
1. Log in to the Zaptec app (can be downloaded from App Store/Google Play).
2. Go to settings and select the desired charging station.
3. Enter the PIN code for the charging station concerned and activate Lock cable
forthis charging station.
Set Lighting Strength for the Status Indicator
• Log in to the Zaptec app.
• Click on the cog in the top right hand corner of the app home page.
• Select the charging station that you wish to amend the settings for.
• Enter the PIN code for the charging station
• The lighting strength can be adjusted by using the slider under
‘Lighting strength for status indicator’.
Reading Error Codes
• Log in to the Zaptec app.
• Click on the cog in the top right hand corner of the app home page.
• Select the charging station that you want to view the error code for.
• Once the app has connected to the charging station, a red field will be displayed
when the charger has active error codes. Click on this field to show the details of
the active error codes.