- 31 -
Regular testing and maintenance of your electric fence system is
important to assure performance. We recommend Zareba voltage
testers DEFT-1 or RSVT8 for this purpose.
Tip: Testing voltage by touching the fence line with your hand or a
weed is not recommended. In addition, if you do this wearing
rubber-soled shoes you will NOT feel a shock.
STEP 1: Test the Fence Line
Check for adequate voltage at the
furthest end of the fence line from
the fence controller.
STEP 2: Test Fence Controller
Remove fence controller power source
(unplug or disconnect from battery)
and disconnect fence and ground
wires. Power fence controller and
touch metal bolts of ground and fence
terminals with ground and fence
prongs of tester.
If output is less than 5,000 volts*,
there is a fence controller problem –
please call Zareba Customer Service at
800-800-1819. (*2,000 volts for
models 10ACRE, 20ACRE, ACC2, 33C,
RS3, SP3 or LIS3)
Electric Fence
Controller
USmanual-AC.indd 31 6/24/2010 4:30:45 PM
To Next Page
Loading...
