To Next PageTo Next PageHow to fix inadequate voltage reading on Zareba Controller?
If you're experiencing inadequate voltage with your Zareba Controller, make sure the power supply is sufficient. You may need to replace or repair the battery or AC power to the fence controller.
What to do if the Zareba SP3 Controller grounding is inadequate?
If your Zareba Controller's grounding is inadequate and reads over 400 volts, add extra ground rods or make them deeper. Continue testing and adding more ground rods until the ground system reads under 400 volts.
How to improve grounding of Zareba Controller with high voltage reading?
If your Zareba Controller's grounding is inadequate and reads over 400 volts, add additional ground rods 6 feet apart connected by hook-up wire until the reading is under 400 volts.
What to do if hook-up wire is leaking to ground on Zareba Controller?
If the hook-up wire is leaking to ground (under 4,500 volts) on your Zareba Controller, ensure you are using 20 KV insulated hook-up wire. Replace the wire and recheck the voltage.
General| Brand | Zareba |
|---|---|
| Model | SP3 |
| Category | Controller |
| Language | English |
Important safety precautions and preliminary checks before installation.
Step-by-step instructions for installing the electric fence controller.
Detailed operating procedures for specific fence controller models.
Instructions on how to replace the battery in the fence controller.
Basic principles explaining how electric fencing systems work.
Overview and identification of key components in an electric fence.
Guidelines for establishing a reliable ground system for optimal performance.
Guidance on choosing and positioning fence posts for stability.
Explanation of insulators and how to properly install them.
Information on selecting and installing various types of fence wire.
Techniques for integrating gate openings into electric fences.
Strategies and devices to protect against lightning and power surges.
Steps involved in sketching and planning an electric fence layout.
Methods for testing voltage and diagnosing/resolving common problems.
Details regarding the warranty terms and conditions for the controller.
