Zareba SP3 - Gate Opening Installation Methods

- 25 -
+ Hot
+ Hot
+ Hot
+ Hot
+ Hot
+ Hot
Metal Gate Installation
Gate openings can be installed a variety of ways. Typically the same
fence wire is used across the opening. If a metal gate or spring gate is
used, 20 KV insulated hook-up wire should be used to carry the elec-
trical current under the gate opening. NOTE: Refer to page 8 for infor-
mation on how to make fence line connections.
+ Hot
+ Hot
Spring Gate Installation
20KV insulated
hook-up wire
Line clamps
Standard Gate Installation
Gate Openings
6