- 9 -
STEP 5: Power Fence Controller
NOTE: Fence controller will
be outputting voltage at this
point – to avoid shock do
not touch fence terminal or
fence wire.
WARNING: For AC-powered fence controllers; do not
modify the plug provided with the controller if it
doesn’t fit into the outlet. Contact a qualified electri-
cian for proper outlet installation.
To reduce the risk of electric shock, these fence control-
lers have a polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electri-
cian to install the proper outlet. Do not change the plug
in any way.
USmanual-AC.indd 9 6/24/2010 4:30:13 PM