To Next PageTo Next Page
Need help?Do you have a question about the Zastone ZT-V9 and is the answer not in the manual?
Lists the items included in the package.
General technical parameters of the transceiver.
Technical specifications for transmitting.
Technical specifications for receiving.
Explains the icons and symbols on the LCD screen.
Identifies and explains the physical buttons and ports of the radio.
Explains the function of each button and key combination.
Step-by-step guide to attaching the antenna.
Instructions for correctly installing the battery pack.
Procedure for safely removing the battery.
Instructions for attaching and removing the belt clip.
Guide for connecting an external microphone.
Information about charging the device's battery.
Detailed steps for charging the battery.
Lists button combinations for various functions.
Explains the Scrambler (SCRM) function and its operation.
Details the Dual Watch (DW) function and its usage.
Configuration for Busy Channel Lock Out (BCLO).
Controls the LCD backlight for visibility.
Manages the key tone on/off setting.
Configures the Automatic Power Off (APO) feature.
Explains the power saving/sleep mode function.
Details the Automatic Number Identification (ANI) feature.
Adjusts the transmit power level.
Configuration for Priority Channel (PRI) settings.
How to use the scan feature for channels/frequencies.
How to enable/disable keypad locking.
Procedures for storing channels in memory.
Steps to store FM radio channels.
How to switch between main frequencies A/B.
How to set the Receive Quiet (RX QT) function.
How to set the Transmit Quiet (TX QT) function.
Adjusting the Squelch (SQL) level.
Configuring the Time-Out Timer (TOT).
Setting the frequency step size.
Choosing between Wide and Narrow bandwidth.
Setting the frequency offset for repeaters.
Configuring the frequency shift direction.
Selecting scan methods (Time, Carrier, Searching).
Setting the scan mode (TO/CO/SE).
Configuring the Voice Operated Transmit (VOX) function.
How to activate the emergency call function.
Choosing transmit mode (BUSY/MASTER).
Setting priority channels.
Identification of radio ID using ANI codes.
How to edit the ANI content.
Using the Variable Frequency Oscillator (VFO) mode.
Procedures for storing radio channels.
How to switch between channel and VFO modes.
Using the 1750 Hz tone for repeater access.
How to use the FM radio function.
Scanning frequencies in FM mode.
Steps to store FM radio channels.
How the device indicates low battery status.
Procedure for cloning settings between radios.
Setting transmit and receive frequencies.
Setting digital/tone squelch codes.
Adjusting the squelch sensitivity.
Enabling power saving mode.
Controlling audible feedback for key presses.
Choosing between high and low transmit power.
Setting up scanning behavior and parameters.
Configuring priority scan channels.
Enabling Busy Channel Lock Out.
Setting the ANI code via software.
Configuring the scrambler feature for secure calls.
General| Output Power | 5W |
|---|---|
| Battery Capacity | 2000mAh |
| Weight | 220g |
| Waterproof | IP54 |
| CTCSS/DCS | Yes |
| Vox | Yes |
| FM Radio | Yes |
| LED Flashlight | Yes |
| Operating Voltage | 7.4V DC |
| Channel Spacing | 25KHz/12.5KHz |
| Display | Yes |
