ZMCBR-H65
4
3. Connection with Other Device
The following chapter shows you the connections among product, ANT and
other equipment, please read this first if you are not sure about the connection,
and it will guide you to the correct connection.
You can connect one receiver directly to the ANT IN.
4. Detailed operation Guide
You should installation the receiver when powering on your product for the first
time after purchase.
4.2 Satellite
Main Menu-> satellite
Press OK enter the satellite model
4.1 Powering On
1. Connect the power cord of the product to
a wall outlet.
2.Power on by pressing the POWER button on
the panel.
To Next Page
Loading...