To Next PageTo Next Page
Need help?Do you have a question about the ZCS Azzurro 3PH HYD5000 ZSS and is the answer not in the manual?
General| Max. DC Voltage (V) | 1000 |
|---|---|
| Number of MPPTs | 2 |
| Nominal AC Voltage (V) | 400 |
| AC Voltage Range (V) | 310-480 |
| Protection Degree | IP65 |
| Frequency | 50/60 Hz |
| Operating Temperature Range (°C) | -25 ~ 60 |
| Phase | Three phase |
| Protection | DC reverse polarity |
Provides an overview of the hybrid inverter's purpose and application.
Essential safety guidelines for electrical installation and maintenance.
Guidelines for safe assembly, maintenance, and handling of the inverter.
Explains labels and symbols on the inverter for safe operation.
Details the product's features and capabilities.
Lists all components included in the inverter package.
Specifies conditions for safe and optimal inverter installation.
Lists necessary tools for inverter installation.
Details recommended positions for wall mounting the inverter.
Step-by-step guide for assembling and mounting the inverter.
Explains using direct CT sensors for grid current measurement.
Details connecting a meter and CT sensors for grid current measurement.
Step-by-step guide for connecting protective ground cables.
Instructions for connecting the battery system to the inverter.
Specific steps for installing Pylontech battery systems.
Guide for connecting a single tower of Pylontech batteries.
Steps for installing WeCo battery systems.
Guide for connecting a single tower of WeCo batteries.
Steps for installing two WeCo battery towers.
Guide for connecting photovoltaic panels to the inverter.
Instructions for connecting loads to the inverter.
Details on connecting the inverter to the power grid.
Setup for USB and Wi-Fi external communication.
Connection and configuration of DRMs interface.
Setting up multi-function COM communication.
Measuring grid currents for energy storage.
Connecting CT sensors directly to the inverter.
Connecting a meter and sensors for grid exchange measurement.
Measuring PV production using meters.
Steps to configure meter parameters for exchange measurement.
Verifying correct meter installation for exchange.
Verifying correct meter installation for production monitoring.
How to operate inverters in parallel mode.
Explains the function of the inverter's buttons and indicator lights.
Crucial steps before configuring the inverter.
Steps for commissioning the inverter after installation.
Setting display language options.
Setting the inverter's date and time.
Importing safety parameters via USB.
Configuring input channels for batteries and PV.
Configuring parameters for different battery types.
Navigational overview of the inverter's main menu interface.
Accessing system settings like language, time, and safety.
Configuring storage modes like Self-use and Time-of-use.
Configuring specific time slots for charging/discharging.
Setting timed schedules for inverter operation.
Performing self-tests on the inverter.
Configuring and understanding the EPS (Emergency Power Supply) mode.
Setting communication addresses for devices.
Setting time parameters for forced battery charging.
Configuring advanced operational parameters.
Configuring battery parameters for internal and external BMS.
Setting depth of discharge limits for battery operation.
Enabling anti-reflux control to limit grid export.
Performing IV curve scans for panel optimization.
Enabling or disabling logic interfaces.
Resetting inverter to factory default settings.
Configuring settings for parallel inverter operation.
Calibrating current sensors for accurate readings.
Viewing current and historical events and errors.
Displaying detailed inverter and battery information.
Displaying categorized inverter information.
Displaying detailed information about the battery system.
Accessing safety parameters for the inverter.
Viewing daily, monthly, yearly, and lifetime energy statistics.
Steps to update the inverter's software.
Technical specifications for HYD5000-HYD8000 models.
Technical specifications for HYD10000-HYD20000 models.
Troubleshooting ground connection errors.
Details error codes related to grid and measurement issues.
Lists error codes for various measurement and connection issues.
Explains errors related to temperature, voltage, and PV.
Lists error codes for battery, bus, and PV overcurrent/overvoltage.
Details errors related to bus, battery voltage, and overload.
Lists errors for permanent faults, communication, and software.
Covers shutdown, derating, fan, BMS, and short-circuit errors.
Step-by-step guide for safely uninstalling the inverter.
Instructions for packing the inverter for transport or storage.
Guidelines for storing the inverter safely.
Information on proper disposal of the equipment.
Installing and configuring an external Wi-Fi adapter.
Steps for physically installing the external Wi-Fi adapter.
Configuring the Wi-Fi adapter for network connection.
Verifying the successful configuration of the Wi-Fi adapter.
Troubleshooting common issues with the Wi-Fi adapter.
Using Android phone as a modem for Wi-Fi setup.
Using iPhone as a modem for Wi-Fi setup.
Installing and configuring an Ethernet adapter for monitoring.
Steps for physically installing the Ethernet adapter.
Verifying the correct installation of the Ethernet adapter.
Troubleshooting common issues with the Ethernet adapter.
Installing and configuring a 4G adapter for monitoring.
Steps for physically installing the 4G adapter.
Verifying the correct configuration of the 4G adapter.
Troubleshooting common issues with the 4G adapter.
Information regarding the product's warranty terms and conditions.
