To Next PageTo Next Page
Need help?Do you have a question about the ZCS AZZURRO HYD6000 and is the answer not in the manual?
Essential safety precautions for installation and maintenance.
Step-by-step instructions for physically mounting the inverter onto the wall bracket.
Detailed steps and diagrams for connecting the battery to the inverter.
Instructions for connecting a single Pylontech battery using communication cables.
Procedures for linking multiple Pylontech batteries in parallel for increased capacity.
Steps to connect a single WeCo battery via its communication port.
Guide for connecting multiple WeCo batteries in parallel, including DIP switch settings.
Recommended specifications and procedure for connecting photovoltaic DC input cables.
Steps for establishing the electrical connection between the inverter and the grid.
How to connect critical loads for Emergency Power Supply (EPS) functionality.
Essential checks to perform before starting the inverter and the system.
Step-by-step guide for the initial power-up and startup of the inverter.
Procedure for updating the inverter's firmware using an SD card.
Detailed steps to verify inverter settings, including country, PV input mode, and working mode.
How to configure the Wi-Fi adapter to connect to a wireless network.
General
