ZCS AZZURRO HYD6000 - Advanced Settings Access

User’s Manual 1PH HYD3000-HYD6000-ZSS
Rev. 1.1 16/03/2021
Identification: MD-AL-GI-00
Rev. 1.1 of 16/03/2021 - Application: GID
46/94
4) QV Time Setting
Select “4. QV Time Setting”, then press “OK”. The following will appear on the screen:
Set: ** s
Press “Up” or “Down” to change the first digit, press “OK” to move to the next digit. After changing all the digits,
press “OK”.
5) Control 81.S1
Select “5. Control 81.S1” and press “OK.” Press “Up” or “Down” to “Enable 81.S1” or “Disable 81.S1”, press “OK.”
6.4.2. Advanced settings
2. Advanced settings
Enter password: 0715
“Up”↑
“Down” ↓
1. Battery Parameters
2. Delete Energy Data
3. Clear events
4. Set Country
5. Anti Reflux
6. IV Curve Scan
7. Battery Active
8. DRMs0 Control
9. Set Safety parameters
Select “2. Advanced Settings” and press “OK”, “Enter password” appears. Enter the password “0715”, press “Up”
or “Down” to change the first digit, press “OK” to move to the next digit, when “0715” appears on the screen
press “OK” to enter the “Advanced Settings” interface.
If “Wrong, Try Again” appears on the screen, press “Back” and enter the password again.