User’s Manual 1PH HYD3000-HYD6000-ZSS
Rev. 1.1 16/03/2021
Identification: MD-AL-GI-00
Rev. 1.1 of 16/03/2021 - Application: GID
Attention: during installation and maintenance of the battery, please follow the rules below.
a) Remove watches, rings and other metal objects.
b) Only use tools with insulated handles.
c) Wear rubber gloves and shoes.
d) Do not place tools or metal objects on top of the battery.
e) Turn off the 1PH HYD3000-HYD6000-ZSS inverter and batteries before connecting/disconnecting
the battery terminals.
f) Both the positive and negative polarities must be isolated from the ground.
2.3. Symbols on the inverter
Some safety symbols are located on the inverter. Read and understand the content of the symbols before
installing the inverter.
This symbol indicates a hazardous situation which, if not avoided, will result in
injury.
Risk of electric shock; wait at least 5 minutes before switching off the 1PH
HYD3000-HYD6000-ZSS inverter.
Be careful of high voltage and electric shock.
Be careful of hot surface.
Comply with the European Conformity (EC) certification.
To Next Page
Loading...
