ZCS AZZURRO HYD6000 - Commissioning

User’s Manual 1PH HYD3000-HYD6000-ZSS
Rev. 1.1 16/03/2021
Identification: MD-AL-GI-00
Rev. 1.1 of 16/03/2021 - Application: GID
39/94
6.3. Commissioning
Main interface:
Figure 39 – Main interface
The default setting of the 1PH HYD3000-HYD6000-ZSS inverter is “Automatic Mode” so if the setting has not
been changed, the operating mode will be as follows:
 When “Photovoltaic Production” > “Household Consumption”
If the battery is not charged, the 1PH HYD3000-HYD6000-ZSS inverter will charge the battery.
 When “Photovoltaic Production” < “Household Consumption”
If the battery is not discharged, the 1PH HYD3000-HYD6000-ZSS inverter will discharge the battery and
provide power to the domestic load.
6.4. Main menu
In the main interface, press the “Down” button to enter the page with the grid/battery settings:
Main interface
Press “Down”
1. Grid(V)
2. Grid(A)
3. Frequency
4. Battery(V)
5. Charge current
6. Discharge current
7. Charge level
8. Battery cycles
9. Battery time