ZCS AZZURRO HYD6000 - Event List

User’s Manual 1PH HYD3000-HYD6000-ZSS
Rev. 1.1 16/03/2021
Identification: MD-AL-GI-00
Rev. 1.1 of 16/03/2021 - Application: GID
48/94
6) IV Curve Scan
6.IV Curve Scan
1.Scan Control
“Up” ↑
“Down” ↓
Enable
Disabled
2.Scan Period
***min
3.Force Scan
The user can enable the “IV Curve Scan” (scan MPPT) to have the 1PH HYD3000-HYD6000-ZSS inverter
periodically check the absolute maximum power points to provide maximum energy from a partially shaded PV
array.
The user can enter the scan period or force an immediate scan.
7) Safety parameters (and other functions not previously described that appear in the user
interface)
Contact ZCS Technical Support for more information.
6.4.3. Event list
3. Event list
“Up” ↑
“Down” ↓
1. List of current events
2.List of Historical events
1PH HYD3000-HYD6000-ZSS inverter event list, including the lists of current and historical events.
1) List of current events
Select “1. List of Current Events”, press “OK” to check the current events.
2) List of historical events
Select “2. List of Historical Events”, press “OK” to check the historical events. Press “Up” or “Down” to check the
historical events if there is more than one page of events.