ZCS AZZURRO HYD6000 - Page 47

User’s Manual 1PH HYD3000-HYD6000-ZSS
Rev. 1.1 16/03/2021
Identification: MD-AL-GI-00
Rev. 1.1 of 16/03/2021 - Application: GID
47/94
5.Anti Reflux control
***KW
1) Battery parameters
1.Battery Parameters
“Up” ↑
“Down” ↓
1)Battery type
7)Maximum discharge (A)
2)*Battery Capacity
8)*Low (V) Protection
3)*Depth of discharge
9)*Minimum discharge
4)Maximum charge (A)
10)No-load discharge (V)
5)*Over (V) Protection
11)*Full Charge (V)
6)*Maximum charge (V)
12) Save
Note: the 2)*, 5)*, 6)*, 8)*, 9)*, 10)* and 11)* parameters do not have to be changed.
2) Reset Energy Data
Select “2. Reset Energy”, then press “OK” to reset the energy data.
3) Clear events
Select “3. Clear Events,” then press “OK” to clear all the events.
4) Country (refer to Set Country )
Select “4. Country”, press “OK”, the settings of the current country appear. Press “Up” or “Down” to change the
first digit, press “OK” to move to the next digit. Enter the new country code and press “OK.”
5) Anti Reflux
“Up” ↑
“Down” ↓
The user can enable the “Anti Reflux Control” to limit the maximum energy exported to the grid. Select “2. Reflux
Power” to enter the maximum amount of energy exported to the grid.
2.Reflux Power
Disable
Enable
1.Anti Reflux control