18
Pre-dive Assembly and Inspection
Loading the Zeagle Integrated Weight System:
Weights can be loaded after the system is donned as shown, or the
weights can be loaded before the system is donned. Considerations in-
clude the amount of weight and the distance to enter the water. Ask your
buddy for help in either case. To load the weight system:
• Unfasten the buckles securing the bladder assembly winglets to the
side of the vest to allow easy access to the weight pockets.
• Load the Ripcord™ or Ziptouch™ pouches through the zippered
opening on the pocket top. Be sure the zipper is fully closed after
loading.
• Pull-Out™- load the pouch though the Velcro Touch Fastener open-
ing. Close the opening and load the pouch into pocket according to
illustration.
• Refasten the buckles securing the bladder winglets to the side of the
vest.
(Important! This is required for proper BC performance)
Pull-Out™
Zip Touch™
Ripcord™
Pocket
Pouch
Pouch
Pocket
Pocket
Pouch
To Next Page
Loading...
