Zebex Z-8072 Plus User Manual

Advanced 2D Image Scanner1

2D Imaging
Barcode Scanner
Programming

Zebex Z-8072 Plus Specifications

General

Light Source	LED
Humidity	5% to 95% (non-condensing)
Light Levels	0 to 100, 000 Lux
Type	Handheld Barcode Scanner
Scanning Technology	Laser
Scan Rate	200 scans per second
Print Contrast	Minimum 30%
Interfaces Supported	USB, RS232, Keyboard Wedge
Input Voltage	5V DC
Operating Temperature	0°C - 50°C (32°F - 122°F)
Storage Temperature	-20°C to 60°C
Drop Test	1.5 m
Supported Symbologies	Codabar
Resolution	4 mil
Skew Angle	60°

Summary

Important Notice

General Handling Precautions

Essential guidelines for safely handling the scanner to prevent damage or injury.

Settings and Programming

Program Set Up Flow

Outlines the step-by-step process for configuring the scanner using programming barcodes.

Scan Mode

Continue Mode behavior

Same Code Delay Time for Continue Scan Mode

Interface Switch

Phone Mode

Terminal Character

RS232 Baud Rate

RS232 Parity Bit

RS232 Stop Bit

RS232 Data Bit

USB Speed

Country Code

Readable Symbologies

Code 128

Allows enabling or disabling the Code 128 barcode symbology.

Code 39

Allows enabling or disabling the Code 39 barcode symbology.

Code 93

Allows enabling or disabling the Code 93 barcode symbology.

Code 32

Allows enabling or disabling the Code 32 barcode symbology.

Code 11

Allows enabling or disabling the Code 11 barcode symbology.

Codabar

Allows enabling or disabling the Codabar barcode symbology.

Interleaved 2 of 5

Allows enabling or disabling the Interleaved 2 of 5 barcode symbology.

RSS 14 (GS1 DataBar 14)

Allows enabling or disabling the RSS 14 (GS1 DataBar 14) barcode symbology.

RSS Expanded (GS1 DataBar Expanded)

Allows enabling or disabling the RSS Expanded (GS1 DataBar Expanded) barcode symbology.

RSS Limited (GS1 DataBar Limited)

Allows enabling or disabling the RSS Limited (GS1 DataBar Limited) barcode symbology.

PDF417

Data Matrix

QR Code

Symbology Features

UPC-A

Configure UPC-A number system digit and check digit settings.

UPC-E

Configure UPC-E number system digit and check digit settings.

Code 39

Code 32 (Italian Pharmacode)

Codabar

Interleaved 2 of 5

Code 11

QR / Micro QR

Data Editing (Prefix)

Prefix Set Up Flow

Steps to set up prefix characters before scanned data.

All Prefix

Configure prefix settings for all barcode types simultaneously.

UPC / EAN Prefix

Configure prefix settings for UPC-A and UPC-E barcode types.

Code 128 Prefix

Configure prefix settings for Code 128 barcode type.

Code 39 Prefix

Configure prefix settings for Code 39 barcode type.

Code 93 Prefix

Configure prefix settings for Code 93 barcode type.

Code 32 Prefix

Configure prefix settings for Code 32 barcode type.

Code 11 Prefix

Configure prefix settings for Code 11 barcode type.

Codabar Prefix

Configure prefix settings for Codabar barcode type.

Interleaved 2 of 5 Prefix

Configure prefix settings for Interleaved 2 of 5 barcode type.

RSS 14 Prefix (GS1 DataBar 14 Prefix)

Configure prefix settings for RSS 14 (GS1 DataBar 14) barcode type.

RSS Expanded Prefix (GS1 DataBar Expanded Prefix)

Configure prefix settings for RSS Expanded (GS1 DataBar Expanded) barcode type.

RSS Limited Prefix (GS1 DataBar Limited Prefix)

Configure prefix settings for RSS Limited (GS1 DataBar Limited) barcode type.

PDF 417 Prefix

Configure prefix settings for PDF 417 barcode type.

Data Matrix Prefix

Configure prefix settings for Data Matrix barcode type.

QR Prefix

Configure prefix settings for QR Code barcode type.

Data Editing (Suffix)

Suffix Set Up Flow

Steps to set up suffix characters after scanned data.

All Suffix

Configure suffix settings for all barcode types simultaneously.

UPC-A Suffix

Configure suffix settings for UPC-A barcode type.

UPC-E Suffix

Configure suffix settings for UPC-E barcode type.

Code 128 Suffix

Configure suffix settings for Code 128 barcode type.

Code 39 Suffix

Configure suffix settings for Code 39 barcode type.

Code 93 Suffix

Configure suffix settings for Code 93 barcode type.

Code 32 Suffix

Configure suffix settings for Code 32 barcode type.

Code 11 Suffix

Configure suffix settings for Code 11 barcode type.

Codabar Suffix

Configure suffix settings for Codabar barcode type.

Interleaved 2 of 5 Suffix

Configure suffix settings for Interleaved 2 of 5 barcode type.

RSS 14 Suffix (GS1 DataBar 14 Suffix)

Configure suffix settings for RSS 14 (GS1 DataBar 14) barcode type.

RSS Expanded Suffix (GS1 DataBar Expanded Suffix)

Configure suffix settings for RSS Expanded (GS1 DataBar Expanded) barcode type.

RSS Limited Suffix (GS1 DataBar Limited Suffix)

Configure suffix settings for RSS Limited (GS1 DataBar Limited) barcode type.

PDF-417 Suffix

Configure suffix settings for PDF-417 barcode type.

Data Matrix Suffix

Configure suffix settings for Data Matrix barcode type.

QR Code Suffix

Data Editing (Truncate/Return)

Truncate/Return Commands

Set Up Flow

Set All Symbologies Truncate/Return

Set UPC-A Truncate/Return

Set UPC-E Truncate/Return

Set Code 128 Truncate/Return

Set Code 39 Truncate/Return

Set Code 93 Truncate/Return

Set Code 32 Truncate/Return

Set Code 11 Truncate/Return

Set Codabar Truncate/Return

Set Interleaved 2 of 5 Truncate/Return

Set RSS 14 (GS1 DataBar) Truncate/Return

Set RSS Expanded (GS1 DataBar Expanded) Truncate/Return

Set RSS Limited (GS1 DataBar Limited) Truncate/Return

Set PDF 417 Truncate/Return

Set Data Matrix Truncate/Return

Set QR Truncate/Return

Code Settings

Set Lengths for Codes

Options for setting length parameters for various barcode symbologies.

Set Lengths for Code 128

Set Lengths for Code 39

Set Lengths for Code 93

Set Lengths for Codabar

Set Lengths for Interleaved 2 of 5

Set Lengths for Code 11

Code Identifiers

Keyboard Caps Lock State

Function Key Mapping

JavaPOS Driver V2.00 for Win32/Win64

How to use RS232 scanner with JavaPOS Driver

How to use USB scanner with JavaPOS Driver

How to Use JavaPOS Driver at your application