6
Preparing the device Tablet for First Use
This section has steps for setting up the device for the first use.
Inserting a SIM Card
IMPORTANT: Before you can connect to a mobile broadband network, you must have your L10 tablet configured with
a WWAN card, an active account with a cellular network provider and a SIM card in your tablet for mobile broadband
access. This SIM card works like the SIM card in your cell phone that connects you to a network provider.
The SIM card holder accommodates two Nano SIM (4FF) cards, for use with the mobile broadband option.
If inserting only one SIM card, place it in the holder labeled SIM1. If inserting two SIM cards, put the card
for the primary carrier in SIM1 and the card for the secondary carrier in the other SIM slot.
1. Find and gently remove the SIM holder tray so the slot is empty.
Figure 1 Empty SIM Card Slot
microSD
Card Slot
USB-C Port
USB-A Ports
(2)
Headset Jack
Barcode
Scanner
Left View
Stylus
Barcode Scanner
Button
Top View
To Next Page
Loading...
Need help?
General
