TC56/TC57 Vehicle Cradle Installation Guide
14
NOTE: Ensure that the TC56/TC57 is fully inserted into the cradle. Lack of
proper insertion may result in property damage or personal injury. Zebra
Technologies Corporation is not responsible for any loss resulting from the
use of the products while driving.
To remove the TC56/TC57 from the vehicle cradle:
1. Push both the left and right Release Latch on each side of the vehicle cradle
simultaneously, until the TC56/TC57 is unlocked in place.
2. Lift the TC56/TC57 upright out of the vehicle cradle.
Figure 12 Remove the TC56/TC57 from the Vehicle Cradle
To Next Page
Loading...
